Engineering :: Production Engineering
|
|
|
|
|
141. |
Green colour on a pattern indicates |
A. |
Surface to be left unmachined |
B. |
Surface to be machined |
C. |
Core prints |
D. |
Seats for loose core prints |
E. |
Fillets |
|
|
Answer: Option D
Explanation:
|
142. |
An important factor to be taken into account while designing a core print is |
A. |
Pattern material |
B. |
Type of mould |
C. |
Moulding sand characteristics |
D. |
Pouring temperature |
E. |
Buoyancy effect of molten material |
|
|
Answer: Option E
Explanation:
|
143. |
A pattern maker's contraction rule accounts for |
A. |
All pattern allowances |
B. |
All materials to be cast |
C. |
All materials of the pattern |
D. |
Only shrinkage, draft and distortion allowances |
E. |
Only shrinkage allowance |
|
|
Answer: Option E
Explanation:
|
144. |
In case of cast iron castings, the shrinkage allowance is |
A. |
7-10 mm/M |
B. |
50-75 mm/M |
C. |
75-100 mm/M |
D. |
0.1-0.01 mm/M |
E. |
1-0.1 mm/M |
|
|
Answer: Option A
Explanation:
|
145. |
Which of the following materials will have highest value of contraction allowance |
A. |
Cast iron |
B. |
Aluminium |
C. |
Bronze |
D. |
Malleable iron |
E. |
Brass |
|
|
Answer: Option E
Explanation:
|
146. |
The machining allowance provided on patterns depends on |
A. |
The material of the casting |
B. |
The material of the pattern |
C. |
The composition of moulding sand |
D. |
Temperature of molten material |
E. |
Size and shape of casting |
|
|
Answer: Option E
Explanation:
|
147. |
Machining allowance in case of die casting is |
A. |
Large |
B. |
Same as in other methods of casting |
C. |
Small |
D. |
Very small |
E. |
Generally not provided |
|
|
Answer: Option E
Explanation:
|
148. |
Choose the incorrect statements. A coolant should be |
A. |
Good lubricant |
B. |
Light in weight |
C. |
Transparent |
D. |
Harmless to operator and machine |
Answer: Option B
Explanation:
|
149. |
Generally the pattern used in manufacturing cast iron pipes are |
A. |
Solid pattern |
B. |
Match-plate pattern |
C. |
Split pattern |
D. |
Sweep pattern |
E. |
None of the above |
|
|
Answer: Option E
Explanation:
|
150. |
When small castings are to be produced in large numbers, the type of pattern generally used is |
A. |
Solid pattern |
B. |
Loose piece pattern |
C. |
Split pattern |
D. |
Sweep pattern |
E. |
Match-plate pattern |
|
|
Answer: Option E
Explanation:
|
Read more:
|
|