Engineering :: Heat Engines
|
|
|
|
|
61. |
In a four stage compressor system first and third stage pressures are 1 and 9 kg/cm2 respectively. What will be the fourth stage delivery pressure |
A. |
3 kg/cm2 |
B. |
9 kg/cm2 |
C. |
27 kg/cm2 |
D. |
81 kg/cm2 |
E. |
243 kg/cm2 |
|
|
Answer: Option D
Explanation:
|
62. |
According to Charle's law |
A. |
At constant pressure the volume of a gas is proportional to its absolute temperature |
B. |
At constant temperature, pressure is proportional to temperature |
C. |
At constant temperature, pressure of a gas is proportional to its volume |
D. |
At constant volume the absolute pressure is proportional to the temperature |
E. |
None of the above |
|
|
Answer: Option A
Explanation:
|
63. |
To avoid moisture trubles, the branch connection from compressed air line are taken from |
A. |
Top side |
B. |
Bottom side |
C. |
Left side |
D. |
Right side |
E. |
Any side |
|
|
Answer: Option A
Explanation:
|
64. |
A heat exchanger that can remove fixed quantity of heat from a system is available where should it be installed for best economy |
A. |
Prior to first stage compression |
B. |
As intercooler |
C. |
After final stage compression |
D. |
Depends upon size of installation |
E. |
Anywhere |
|
|
Answer: Option A
Explanation:
|
65. |
The fact that the product of pressure and volume of a fixed amount of gas is approximately a constant value is known as |
A. |
Charle's law |
B. |
Gay Lusac's law |
C. |
Dalton's law |
D. |
Lewis law |
E. |
None of the above |
|
|
Answer: Option E
Explanation:
|
66. |
For minimum work in multistage compression, the work done on |
A. |
First stage should be least |
B. |
Last stage should be least |
C. |
All stage should be equal |
D. |
There is no such consideration |
E. |
None of the above |
|
|
Answer: Option C
Explanation:
|
67. |
In multistage compression, perfect intercooling means |
A. |
Temperature of air at inlet to subsequent stages is equal to initial temperature |
B. |
Temperature of air at inlet to subsequent stages is less than initial temperature |
C. |
Temperature of air at inlet to subsequent stages should be zero |
D. |
Temperature of inlet to subsequent stages should be equal to the final temperature |
E. |
None of the above |
|
|
Answer: Option A
Explanation:
|
68. |
The performance of air compressor at high altitudes as compared to that at sea level will be |
A. |
Better |
B. |
Same |
C. |
Inferior |
D. |
Will depend upon temperature of air |
E. |
Will depend on type of compressor |
|
|
Answer: Option C
Explanation:
|
69. |
According to Boyle's law |
A. |
At constant pressure the temperature of a gas varies inversely as its volume |
B. |
At constant pressure the absolute temperature of a gas varies inversely as its volume |
C. |
At constant temperature, the pressure of a gas varies inversely as its volume |
D. |
At constant temperature, the absolute pressure of a gas varies inversely as its volume |
E. |
None of the above |
|
|
Answer: Option D
Explanation:
|
70. |
Which is incorrect? |
A. |
Compression ratio = initial volume + final volume |
B. |
Final pressure = Initial pressure x compression ratio |
C. |
Initial pressure = final pressure + compression ratio |
D. |
Initial volume = compression ratio x final volume |
E. |
None of the above |
|
|
Answer: Option E
Explanation:
|
Read more:
|
|